manpowergroup.com.mt
Buscar
Inicio cable xlr

XLR 3 Pin to Blunt Installation Cable with Neutrik XLR Connectors (Mal - Custom Cable Connection

€ 60.50 · 4.7 (517) · En stock

Por un escritor de hombre misterioso

Custom Cable Connection microphone cables are a great choice for custom "pro" audio hookups to connect microphones to PA amplifiers, mixers or extension cords. These hookups are balanced, which helps cut out noise and hum pickup. A balanced line consists of three paths of current flow, using a pair of twisted wires wit
Our 1/4 inch TRS cables allow your signal to be quiet, eliminating frustrating hums, buzzing, and crackles. These cables make an excellent interconnect cable for any 1/4 balanced line cable. This cable is a popular choice for lineout into soundboards, powered speakers and for use in touring and other live-sound applications. This cables flexible design eliminates kinks and twists for a tangle-free performance.
Features:

  • High performance Balanced Microphone Cable 24 AWG with 95% spiral shield.
  • PVC Black Jacket
  • Shield: Bare annealed copper
  • Capacitance: 21 pF/ft. @ 1 kHz
  • Characteristic Impedance: 70 Ohm NOMINAL
  • D.C. Resistance @ 20°C: 23 Ohm/1000'
  • Gold Plated 1/4in Male Stereo Rean NYS228BG Connectors
  • Assembled in Dallas, TX by Custom Cable Connection

    Pinout
  • Tip : Red
  • Ring : Blue
  • Shield : Shield
    •

    Don't see the length you are looking for, we will build it for you!
  • For a custom length quote, call: 866.770.3207 or email: sales@

    • Our 3.5mm Stereo Male (TRS) to 1/4 inch Stereo Male (TRS) Cable is designed to interconnect audio devices with stereo and mini stereo phone jacks. It is ideal for use in a variety of professional and consumer applications.

    Typical Applications:
  • Audio connections between multimedia devices.
  • Connect your iPod, laptop, or similar device to a mixing console, home theater devices, and amplifiers.
  • Works with any devices standard 3.5mm aux Jack, such as iPad, iPhone, iPods, MP3 players, Laptops, PCs, Cell Phones, Tablets, Home theater, speakers etc

    Features:
  • 2 Conductor, 24 AWG, stranded bare copper, polypropylene insulated, aluminum/polyester tape shield, PVC jacketed installation microphone wire
  • 3.5mm Male Stereo Solder Plug, Nickel plated with strain relief
  • 1/4 Plug with 3 Conductor Nickel Shell Solder Contacts

    Don't see the length you are looking for, we will build it for you!
  • For a custom length quote, call: 866.770.3207 or email: sales@

    • Custom Cable Connection balanced Neutrik microphone cables are a great choice for custom pro audio hookups to connect microphones to PA amplifiers, mixers or extension cords. These hookups are balanced, which helps cut out noise and hum pickup. A balanced line consists of three paths of current flow, using a pair of twisted wires with a shield covering them. The twisted pair would carry the actual audio signal while the overall shield acts as a noise absorbing barrier. The shield is typically connected to ground.

  • The outer jacket is constructed from a durable, ultra-flexible matte black PVC compound. O.D.: .210
  • 24-gauge bare copper conductors
  • Connectors: XLR Male Plug to XLR Female Jack
  • Rugged Nickel Plated XLR Connectors with Strain Relief
  • Neutrik NC3MXX and NC3FXX Connectors

    • Our 1/4 inch TRS cables allow your signal to be quiet, eliminating frustrating hums, buzzing, and crackles. These cables make an excellent interconnect cable for any 1/4 balanced line cable. This cable is a popular choice for lineout into soundboards, powered speakers and for use in touring and other live-sound applications. This cables flexible design eliminates kinks and twists for a tangle-free performance.
    Features:
  • High performance Balanced Microphone Cable 24 AWG with 95% spiral shield.
  • PVC Black Jacket
  • Shield: Bare annealed copper
  • Capacitance: 21 pF/ft. @ 1 kHz
  • Characteristic Impedance: 70 Ohm NOMINAL
  • D.C. Resistance @ 20¬∞C: 23 Ohm/1000'
  • Neutrik Connectors: NP3RX and NYS228
  • Assembled in Dallas, TX by Custom Cable Connection

    Don't see the length you are looking for, we will build it for you!
  • For a custom length quote, call: 866.770.3207 or email: sales@

    • Custom Cable Connection microphone cables are a great choice for custom pro audio hookups to connect microphones to PA amplifiers, mixers or extension cords. These hookups are balanced, which helps cut out noise and hum pickup. A balanced line consists of three paths of current flow, using a pair of twisted wires with a shield covering them. The twisted pair would carry the actual audio signal while the overall shield acts as a noise absorbing barrier. The shield is connected to ground.

  • The outer jacket is constructed from a durable, ultra-flexible matte black PVC compound. O.D.: .210
  • 24-gauge bare copper conductors
  • Connectors: XLR 3 Pin to 3 Bare Wires
  • Connector Options: Male (31096) or Female (31095)
  • Rugged Nickel Plated XLR Connectors with Strain Relief
  • Pinout
  • Pin 1- Shield
  • Pin 2- Red
  • Pin 3- Blue

    • TRS AUDIO/STEREO CABLE: This balanced microphone cable has male to male connectors, making it the perfect accessory for line out into soundboard

    100 Foot Neutrik NC3MXX Male XLR to Neutrik Rean NYS228 1/4 Inch (6.35mm) TRS Balanced Pro Audio Cable by Custom Cable Connection

    Why do you have to use the DMX terminator? - PropAudio

    BALANCED XLR MIC CABLE: Two of the conductors are signaled (+ and -) and the last conductor (shield) serves as a guard to sensitive RFI [radio

    6 Foot Custom Cable Connection Pro-Audio XLR Balanced Microphone Female to Blunt 18 AWG Economy Shielded Install Cable

    Professional Look and Versatility - Neutrik NA2MPMF Male XLR to Female RCA Adapter The Neutrik NA2MPMF Male XLR to Female RCA Adapter is pre-wired and reliably interlocks various connector systems. The adapter is a three pole XLR to RCA/phono socket. Wired according to IEC 268-12. Pin.

    Neutrik NA2MPMF male XLR to Female RCA Adapter

    250 Foot Custom Cable Connection Pro-Audio XLR Balanced Microphone Cable with Neutrik NC3MXX Male and Neutrik NC3FXX Female XLR Connectors : Musical Instruments

    BALANCED XLR MIC CABLE: Two of the conductors are signaled (+ and -) and the last conductor (shield) serves as a guard to sensitive RFI [radio

    1 Foot Custom Cable Connection Pro-Audio Balanced Microphone with Neutrik NC3MXX XLR Male Connector to Blunt end Cable

    BALANCED XLR MIC CABLE: Two of the conductors are signaled (+ and -) and the last conductor (shield) serves as a guard to sensitive RFI [radio

    1 Foot Pro-Audio XLR Balanced Microphone Male to Blunt Economy 18 AWG Cable

    Ultra Flexible 20 AWG conductor copper wire with copper shield High Quality Gold Plated Neutrik NC3 Series XLR Connectors Custom Built To Order in the

    Male to Female XLR Cable with Neutrik NC3 Connectors and Premium 20ga Wire - 100: FT Long: Black

    10 Foot Neutrik NC3MXX Male XLR to Neutrik Rean NYS228 1/4 Inch (6.35mm) TRS Balanced Pro Audio Cable by Custom Cable Connection : Musical Instruments

    Custom Cable Connection 1 Foot Pro-Audio XLR Balanced Microphone Male to Blunt Economy 18 AWG Cable : Musical Instruments

    BALANCED XLR MIC CABLE: Two of the conductors are signaled (+ and -) and the last conductor (shield) serves as a guard to sensitive RFI [radio

    1 Foot Custom Cable Connection Pro-Audio XLR Balanced Microphone Cable with Neutrik NC3MRX Right Angle Male and Neutrix NC3FXX Female XLR Connectors

    XLR 3 Pin to Blunt Installation Cable with Neutrik XLR Connectors (Mal - Custom Cable Connection

    Custom Cable Connection microphone cables are a great choice for custom pro audio hookups to connect microphones to PA amplifiers, mixers or

    XLR 3 Pin Female to Blunt Install Cable