XTool D1 Pro PCB and Button Cover Kit – Embrace Making

. Upgrade your XTool D1 Pro laser cutter and engraver with the parts as seen in the video above. This listing is for the PCB and button cover kit. Note: If you have a D1 non-pro version or the latest D1 Pro V2.0, the top button cover should fit both models. However, at this point I am not certain if the PCB cover will
. Upgrade your XTool D1 Pro laser cutter and engraver with the parts as seen in the video above. This listing is for the PCB and button cover kit. Note: If you have a D1 non-pro version or the latest D1 Pro V2.0, the top button cover should fit both models. However, at this point I am not certain if the PCB cover will fit the non-pro. I know the PCB cover will not fit the D1 Pro 2.0. I will have a separate listing for that soon. I have solicited a lot of feedback from XTOOL D1 users and have heard some common complaints about minor annoying issues.  The first of the issues is the lack of protection for the main control board PCB. The main control board sits behind/inside of the front frame member. Inside of a garage / wood working shop it is left exposed to the collection of dust and wood particles that will collect on top of the circuit board. Even by products such as soot from the lasering process may collect on the board. Over time this may affect the board's ability to dissipate heat and could lead to the failure of the circuit board. Therefore, the PCB cover provides a barrier to ingress of unwanted particles. There are some small vent holes to allow heat to escape. It is also very easily removed with a pull tab if something needs to be accessed behind the cover. Additionally, another common complaint was the lack of protection for the main button. I have personally found this to be problematic when leaning over the machine to make last minute adjustments to work pieces. A few times my arm / elbow has accidently hit the main button which tells the machine to start. This is not ideal as you do not want your hands near the laser when it is operating.  For this I created the main button cover. It simply installs with 3M double sided tape (included). There is a flexible RED or GREY cap cover to keep the button protected from liquid spills that could find their way down to the mainboard beneath it. When the cap is removed the button sits safely inside of the plastic guard that prevents accidental activation.  What is included: Mainboard PCB Cover (Black) Button Cover (Red or Grey Cap with Black Frame) As an Associate I earn from qualifying purchases (at no extra cost to you): XTOOL D1 Pro 10W XTOOL D1 Pro 20W XTOOL D1 Pro 40W Laser Proof Silicone Work Surface Mat (20 x 28) Laser Proof Silicone Work Surface Mat (23.5 x 31.5)  

XTool D1 Pro RA2 Pro Tilt Mechanism Kit – Embrace Making

xTool Enclosure: foldable and smoke-proof cover for D1/D1 Pro and othe

XTOOL RA2 PRO Rotary Switch Installation (Front Mount)

XTool S1 Button Cover and Prism Holder Kit – Embrace Making

This product has been updated to be able to mount on the inside of the frame as well as on the outside. Below are the video instructions to mount to

XTool RA2 / Y-Axis Switch V2

XTool D1 Pro Laser Enclosure V2 Kit – Clearview Plastics

xTool Enclosure: foldable and smoke-proof cover for D1/D1 Pro and othe

XTool D1 Pro Laser Enclosure V2 Kit – Clearview Plastics

Engineering and Design

Best Sellers – Embrace Making

xTool Enclosure for Laser Engraver, Flame Retardant for xTool D1 /D1 Pro and Other Laser Cutter, laser engraver enclosure with exhaust fan, Isolating 99% of smog, Odor for Laser Engraving Machine

., Upgrade your XTool D1 Pro laser cutter and engraver with the parts as seen in the video above. This listing is for the PCB and button cover kit. ,

XTool D1 Pro PCB and Button Cover Kit

XTOOL RA2 PRO Rotary Switch Installation (Front Mount)

XTool D1 Pro Laser Enclosure V2 Kit – Clearview Plastics

XTool S1 Button Cover and Prism Holder Kit – Embrace Making